Home / 智能电网和AMI系统的工业路由器制造商
#新闻 #行业博客 · October 19, 2026 · About 9 minutes
views

Industrial Router Manufacturer for Smart Grid and AMI Systems

Written By

Tespro

An AMI router can remain registered on a cellular network while its data session or VPN tunnel fails. For utilities, this is more than a connectivity issue: the right supplier must support hardware selection, application testing, customization, and repeatable deployment.

Tespro is an industrial router manufacturer developing cellular connectivity equipment for smart grid, metering, and industrial IoT applications. Here is what utility engineers and OEM buyers should evaluate before ordering.

1. Why Source AMI Routers Directly from Tespro?

Tespro performs hardware and software R&D, manufacturing and assembly in Zhuhai, China. The engineering teams develop communication interfaces and firmware. Published manufacturing processes describe quality control and testing of each unit prior to shipping. Technical support and R&D work collaboratively to fulfill project requirements.

These features are important for buyers when the standard router requires modification to be integrated with a DCU, metering cabinet or UMS. They also serve to discuss consistency of configuration between prototypes and production orders.

However, factory testing is not a substitute for application-specific acceptance testing. Ask Tespro to identify the tests, records, and firmware versions applicable to your order.

2. What Kinds Of OEM/ODM Customization Are Available?

As part of its OEM/ODM support, Tespro can integrate customer branding and specific hardware, interface and software requirements. The Tespro TR-445 series document describes integrating modular I/Os, custom branded firmware and web interfaces, and SDKs and other resources for remote configuration.

In general, the work scope of an AMI customization should include:

•Hardware: definition of RS-485/RS-232/Ethernet ports and power input, placement of antennas and enclosure mounting;

•Software: definition of carrier settings, VPN policies, protocols, user permissions, firmware branding and integration with existing management tools;

•Production: approved samples, configuration baseline, change control, labels, documents and acceptance criteria.

It should be understood that the agreed customization scope and feasibility should be defined against a specific model and purchase order specification and not derived from product family assumptions.

3. Where Does an Industrial Router Fit in AMI?

A common network path is:

Smart meters → RF mesh/PLC → DCU → Cellular Router → Head-end System (HES) → Meter Data Management System (MDMS).

The router provides IP backhaul between a concentrator and the utility network. Other AMI architectures connect meters directly over cellular or use gateways with integrated routing.

Confirm which device is responsible for protocol conversion, meter-data buffering, and retransmission. Transparent TCP/UDP forwarding does not automatically mean the router stores readings during an outage.

4. Which Tespro Router Features Matter?

The Tespro TR-445 industrial cellular router provides a useful reference for specification discussions:

FeatureTR-445 specificationBuyer verification
Cellular connectivity4G/5G options; dual SIM/eSIM configurationsCarrier bands and tested failover
Ethernet1 Gigabit WAN + 4 Gigabit LANDCU connections and network segmentation
Serial and I/O2 RS-485, 1 RS-232, 4 configurable I/OWiring, isolation and protocol behavior
Meter protocolsDLMS, IEC 62056-21, DL/T 645-2007 listedExact meter profiles and commands
Operating environment12–36 V DC, −40°C to +75°C, IP30Cabinet protection and electrical conditions
ManagementVPN functions, link detection, firmware managementSecurity policies and recovery procedures

These specifications apply to the TR-445, not every Tespro router. Listed protocol support does not guarantee interoperability with every meter; DLMS security settings, object models, and communication profiles must be tested with actual equipment.

5. Is 4G Enough for a Smart Grid Deployment?

4G is often sufficient for routine scheduled meter readings. For other cases, consider 5G. Other factors such as the availability of the network, performance of the antenna, and latency of the network become more important than the maximum speed of the network.

In such cases, measure RSRP, RSRQ, and SINR at the location of interest. Also, consider the effect of VPN, reporting bursts, coverage of the cellular network, loss of an external antenna cable, and surge protection in the design.

6. How Should Quality and Failover Be Verified?

A dual-SIM router does not automatically restore application sessions when it switches cellular carriers. An invalidated HES connection and VPN, due to a change of IP address, would require reconnection.

Prior to bulk purchasing, perform tests with actual DCU, meters, SIMs and HES. Document the following:

•Interoperability: Head-End System commands, authentication of meters, and end-to-end Head-End System acknowledgements

•Recovery: Time to reconnect VPN, link loss detection, and repeated outages

•Data Integrity: Records that remain unacknowledged, DCU retransmits data upon reconnection to the service

•Environments: Consider supply disturbances, temperature, grounding and cabinet conditions

•Remote Operations: Think of access controls, firmware updates, retention of configuration, logs.

Restoration of the network does not recover data in the DCU and other utility systems.

7. What Should Procurement Confirm Before Ordering?

A datasheet of the relevant model, the latest firmware, supporting compliance documents, evaluation plan sample, factory inspection scope and support arrangements. Agree on the terms of deliverables for customization, MOQ, production lead time, schedule and shipping. Also agree on how firmware and/or components will change across batches.

Tespro's OEM/ODM and contract manufacturing capabilities are preliminary, project level validation and terms are agreed upon purchase order.

Discuss your AMI router needs with Tespro.

State your DCU and meter interface, operating region, cellular carriers, security requirements, quantities expected and deployment region. Tespro will provide feedback and consider your OEM/ODM needs.

Request a quote for a Tespro industrial router..

FAQs

Q1. Does the Tespro TR-445 support DLMS and smart meter protocols?

The TR-445 lists DLMS, IEC 62056-21, and DL/T 645-2007 among its supported protocols. Actual meter interoperability and protocol conversion functions should be verified using the target meter models and software configuration.

Q2. Does Tespro offer OEM/ODM industrial router services?

Yes. Tespro provides OEM/ODM services, including hardware customization, interface configuration, firmware development, and product branding. Customization options depend on the selected router model and project requirements.

Q3. Where are Tespro industrial routers manufactured?

Tespro manufactures and assembles its industrial connectivity devices in Zhuhai, China. Its in-house engineering and production capabilities support product development, customization, quality control, and manufacturing.

Q4. Which Tespro industrial router is suitable for AMI systems?

The Tespro TR-445 is an option for AMI cellular backhaul applications. It provides 4G/5G connectivity, Gigabit Ethernet, RS-232/RS-485 interfaces, and industrial communication features. Final suitability depends on DCU compatibility and project testing.

Q5. Do Tespro industrial routers support 4G and 5G networks?

Yes. Tespro offers industrial cellular routers with 4G LTE and 5G connectivity options. Supported frequency bands and cellular features vary by model and configuration, so carrier compatibility should be verified before ordering.

Recent Articles

在Enlit Europe 2026预订您的免费BT-PLUS样品

公告 |Enlit欧洲2026 Enlit Europe 2026将于2026年11月10日至12日在奥地利维也纳举行。Tespro已准备了有限数量的免费BT-PLUS蓝牙光学探针样品面向展览参观者。 计划参加展览吗?如果您对我们的BT-PLUS光学探针感兴趣,请提前联系销售团队,预约您的免费样品! 展览详情 样品预订与收集 如有任何疑问或进一步帮助,欢迎随时联系我们的销售团队。 感谢您持续的支持。我们期待在2026年Enlit Europe与您见面! 特斯普罗——一世界一特斯普罗 www.tespro.com

icon_time

November 04, 2026

icon_Check

新闻

无线数据传输的DTU:4G Cat 1 与 NB-IoT

升级远程计量系统的公用事业运营商可能会发现最低成本的蜂窝DTU无法满足其远程轮询和维护需求。在这种配置中,电表或专用数据采集软件负责电表读数,而DTU则提供RS485连接和蜂窝数据传输。尽管预定的电表读数已成功传送到服务器,但远程轮询命令可能会出现延迟,反复连接可能增加功耗,固件更新可能超过可用维护窗口。任何额外的协议处理或自动数据采集能力取决于具体的TD-DTU型号,部署前应予以验证。 这些问题通常源于在LTE第一类和NB-IoT之间的选择。 这两种技术都支持蜂窝机器间通信。但它们在数据量管理、网络访问和电力方面存在差异。分析无线数据传输的DTU选项需要检查整个数据采集周期,而不仅仅是发送到服务器的字节数。 以Tespro工业计量为例,主要问题在于DTU是作为间歇性连接终端,还是作为现场仪器与远程管理系统之间的通信桥梁。 1. 4G Cat 1 和 NB-IoT 在技术上有何不同? LTE运营商在LTE第一类线路使用10 Mbps的下行峰值速率和5 Mbps的上行速率。通过使用其他技术以及在180 kHz载波上采用NB-IoT的窄带信令,可以提升网络覆盖范围。 NB-IoT设计用于小规模且不频繁的数据传输,并能长时间运行一次充电。 工程因素 LTE Cat 1 NB-物联网 无线电带宽 标准LTE运营商 180 kHz 峰值吞吐量 10 Mbps 下载 / ...

icon_time

October 30, 2026

icon_Check

新闻

行业博客

BACnet Modbus 和 OPC UA 工业协议转换器:工程集成指南

建筑管理系统将冷水机温度暴露为BACnet对象,但工厂PLC期望Modbus持有寄存器。设备共享以太网网络,但PLC无法解释BACnet对象标识符、属性或数据类型。 仅靠以太网连接无法解决这种不匹配。集成需要协议解释、地址映射、数据转换以及通信故障的受控处理。 在Tespro,我们评估BACnet Modbus和OPC UA的工业协议转换器与实际通信角色和点列表的关系。我们的TC-100支持这些协议家族,但选择正确的转换方向和数据表示仍是项目级工程决策。 1. 在选择硬件前确认协议方向 BACnet、Modbus 和 OPC UA 在组织和交换信息的方式上有所不同。即使两个设备支持相同的传输网络,它们的应用层数据也可能不兼容。 协议 数据结构 主积分约束 BACnet/IP 对象与属性 对象标识符、Present_Value、状态和命令优先级 BACnet MS/TP 通过RS485的BACnet对象 串行令牌传递拓扑与时序 Modbus RTU/TCP 线圈和16位寄存器 地址偏移、寄存器分组与数据解释 OPC UA 类型化节点与属性 命名空间标识符、访问权、时间戳和数据质量 ...

icon_time

October 29, 2026

icon_Check

新闻

行业博客

Request Your OEM/ODM Solution

Share your requirements, and our hardware and software experts will design a solution optimized for accuracy, reliability, and efficiency.